Beverly Hills Fence Permits: Height Rules, Filing Checklist & 2026 Costs

By LA Electric Gate Service

If you own a home in Beverly Hills, California, the fence rules are stricter than almost anywhere else in Los Angeles County — and they are enforced. The short version: you need a building permit for any fence or wall in a front yard, no matter how short, and for any fence or wall over six feet tall anywhere on the property. That rule comes straight from the Beverly Hills Municipal Code, and it applies identically in the Central, Hillside, and Trousdale areas of the city.

This guide walks through the actual code — height limits by zone and yard, the filing checklist for the city’s online permit portal, what drives your permit fee with worked examples, and real project cost ranges — so your first submittal has a genuine shot at approval without a resubmittal cycle.

TL;DR

  • In Beverly Hills, a permit is required for any front-yard fence or wall of any height, and for any fence or wall over 6 feet tall anywhere on the property (BHMC §§ 10-3-2420, 10-3-2516, 10-3-2616).
  • Front-yard height limits depend on your zone: the first 20% of the front yard (measured from the front lot line) is capped at 3 feet; beyond that you can go to 6 feet, but anything over 3 feet must be “open to public view.”
  • Walls and fences over 18 inches tall must sit at least 3 feet back from the front lot line, with landscaping in between — a rule that catches many homeowners off guard.
  • File through the city’s Online Plan Review & Permit Application (OPA) portal, one application per structure, with a scaled site plan and elevations.
  • Permit fees scale with project valuation. A roughly $12,000 fence project works out to about $825 in city permit and issuance fees under the city’s published fee schedule (effective July 2023; illustrative — verify the current schedule before filing).
  • Most delays are paperwork, not code violations: missing HOA letters, unscaled plans, and ambiguous elevations.

Do You Need a Permit for Your Fence?

Two triggers, worth memorizing before you call a contractor:

  1. Any fence or wall in a front yard, regardless of height. A 3-foot picket fence along the sidewalk still needs a permit in Beverly Hills.
  2. Any fence or wall over 6 feet tall, no matter where it sits — side yard, rear yard, anywhere.

Side and rear fences at 6 feet or under generally fall outside the permit requirement — but that does not always mean zero paperwork. If the fence is tied to companion work like a retaining wall, a pool enclosure, or grading, that work often triggers its own permit even if the fence alone would not. And one detail that matters for a gate company’s customers: the code does not distinguish gates from walls and fences — a driveway gate is regulated exactly like the fence around it.

Height Rules by Zone and Yard

Beverly Hills writes its fence rules by where the fence sits and which part of the city you are in. Confirm whether your property is in the Central area, the Hillside area, or Trousdale before you design anything — the numbers change.

Central area (BHMC § 10-3-2420)

LocationMaximum heightConditions
Front yard, first 20% of front-yard depth (measured from the front lot line)3 ftSolid or open
Front yard, beyond the first 20%6 ftAny portion over 3 ft must be open to public view
Street-side yard6 ftPortion over 3 ft must be open to public view or set back an average of 1 ft (minimum 6 in) from the street-side lot line with landscaping
Side and rear yards6 ftSolid permitted
Rear yard10 ft walls/fences; 16 ft hedgesRaised by ordinance effective October 21, 2022
Side yard adjacent to an alley10 ft walls/fences; 16 ft hedgesAlley-adjacent conditions

Hillside area (BHMC § 10-3-2516) — materially stricter in front

  • Within 3 feet of the front or street-side lot line: no wall or fence at all.
  • 3 to 10 feet from the front or street-side lot line: 3 feet maximum.
  • Beyond 10 feet: up to 6 feet, with anything over 3 feet open to public view.
  • Side yards: 7 feet on the near side, up to 12 feet on the far side (see § 10-3-2516 for how near and far are measured).
  • Walls in series must be separated by at least 10 feet of landscaping, with a cumulative 12-foot cap per 50 feet of wall length.

Trousdale area (BHMC § 10-3-2616)

Trousdale front yards follow the same 20% / 3-foot / open-to-public-view pattern as the Central area. The big Trousdale difference is in the rear: rear yards are capped at 8 feet — the 10-foot wall / 16-foot hedge allowances are Central-area rules, not Trousdale rules.

Two Rules That Trip Up Beverly Hills Homeowners

1. The 18-inch / 3-foot front-lot-line setback

This is the compliance trap the old version of this guide missed. Under § 10-3-2420, any wall or fence over 18 inches tall must be set back at least 3 feet from the front lot line, with landscaping planted in between. You cannot run a 3-foot fence right along the sidewalk — it has to sit 3 feet back, behind a planted strip. Measure this before you sketch a single post location.

2. What “open to public view” actually means

The code defines this precisely (§ 10-3-100), and it is stricter than “not solid”:

  • Over any 10-foot length of fence, opaque materials may cover no more than 30% of the area.
  • No single opaque element may block more than 50% of the open view, measured straight-on or at a 45-degree sweep.
  • Tree foliage more than 8 feet above grade counts as open to public view.

In practice: wrought-iron pickets with 4-inch spacing, spaced horizontal slats, or open metalwork pass. A stucco wall with small decorative cutouts does not. A workable privacy-friendly design pairs a low masonry base with open picket panels above — defined at eye level, visually permeable above.

How height is measured

Height is measured from the grade on the side closest to the property line, and it includes columns, pilasters, posts, and gates. The code expressly prohibits adjusting grades to get around the limits — building up a berm to “lower” your fence does not work.

When a Permit Is Required: Permanent vs. Temporary Fencing

The two triggers above cover permanent fences. Temporary fencing is separate:

  • Vacant lots in Beverly Hills must be fenced — the city’s requirement is a 6-foot chain-link fence with green mesh screening.
  • Active construction sites have their own temporary-fence rules (setbacks from the property line, pedestrian and vehicle access provisions). Confirm the current requirements with the Building Division before your contractor puts up site fencing — this is a common source of stop-work notices.

And a filing detail that doubles your paperwork if you miss it: each separate structure needs its own permit application. A front-yard fence and a detached rear-yard wall are filed and reviewed independently — they do not get bundled into one submittal.

How to File: The OPA Checklist

Every Beverly Hills fence permit application runs through the city’s Online Plan Review & Permit Application (OPA) portal. Here is how to move through it without generating a resubmittal:

  1. Log into the OPA portal and select the Fence/Wall permit type.
  2. Submit one application per structure — a front fence and a side gate mean two applications.
  3. Upload a scaled site plan showing property lines, the fence location relative to those lines, and nearby existing structures.
  4. Include scaled elevations showing height, materials, and the finished-face design on both sides of the fence.
  5. For taller walls, the city may require structural calculations — confirm with plan review before you file rather than after a rejection.
  6. Attach an HOA authorization letter if your property is in a homeowners association. Several Beverly Hills neighborhoods layer HOA design review on top of city review.
  7. Include a contractor authorization letter if someone other than the property owner is filing — the normal case when a licensed installer handles the paperwork.
  8. Submit and monitor for plan-check comments through the portal. Reviewers routinely ask for clarification before approval.

Pro tip: draft your elevations so the finished face, the open picket sections, and the dimensions all appear in the same drawing. Reviewers flag ambiguous elevations constantly, and one clear drawing that shows height and visibility compliance at once can save an entire review cycle.

Stuck mid-application? The city’s plan reviewers are reachable directly: structural questions go to cdplanreview@beverlyhills.org, zoning and land-use questions to cdplanning@beverlyhills.org (both listed in the city’s OPA Guide). OPA is electronic-first — confirm current intake requirements with the Permit Center rather than assuming paper submittals are still expected.

Design and Finish Rules

Any wall or fence within 5 feet of a property line needs a finished appearance on both sides. Plain uncoated concrete block is not allowed unless covered with an approved finish. Approved finishes under the code include:

  • Colored stucco
  • Wood stain or sealed natural wood
  • Natural or polished stone
  • Slumpstone or split-faced block
  • Prefabricated finish texture panels
  • Color-coated tubular steel or wrought iron

Two more numbers that matter for masonry entry features: walls and fences are capped at 2 feet thick, and no column, pillar, post, or other supporting element may be more than 24 inches wide.

Exceptions and Discretionary Approvals

Some properties do not fit the standard height table, and the code allows for that — but these are discretionary, not automatic:

  • Minor Accommodation: can allow a wall or fence up to 6 feet tall between 3 and 10 feet from a front or street-side lot line, provided it is open to public view and the reviewing authority finds no substantial adverse impact on the scale and massing of the streetscape or the garden quality of the city.
  • Hillside R-1 Permit: can allow a wall up to 6 feet to encroach into a front or street-side yard without otherwise meeting the setback and open-to-view rules, subject to the same kinds of findings.

If your lot has an unusual slope, an easement, or sits on a zoning boundary, hire a licensed designer or permit expediter before you file. Discretionary findings are subjective, and a professionally prepared package — one that speaks the code’s language about streetscape and garden character — makes a stronger case than a homeowner sketch.

Why Applications Get Delayed

Most delays are not code violations. They are paperwork gaps — the same handful, over and over:

  • Missing HOA authorization letters
  • Incomplete or unscaled elevations
  • An unclear or outdated property-line survey
  • Fence designs that do not actually satisfy “open to public view” above 3 feet
  • Forgetting the 18-inch / 3-foot front-lot-line setback with landscaping

Inspections, Timelines, and What Drives Your Permit Fee

Plan check typically runs through one or more review rounds before approval, and each round adds time if the first submittal is incomplete. Once permitted, expect inspections at the footing stage, at framing or structural attachment points, and a final inspection covering finish quality and gate operation. If your project includes an automated gate, add an electrical inspection — gate automation triggers its own review under separate electrical permit requirements.

Permit fees in Beverly Hills scale with total project valuation (labor plus materials), not with fence length. Here are two worked examples computed from the city’s published Development Plan Check & Permit Fee schedule (effective July 15, 2023; permit fee by valuation band, plus the $95 permit issuance fee). Treat these as illustrative — fee schedules are updated periodically, so verify the current schedule before filing:

  • ~$12,000 project (e.g., an open-picket front fence with a pedestrian gate): $80 for the first $500 of valuation, $67.50 for the next $500, $583 for the remaining $11,000 → $730.50 permit fee + $95 issuance = about $826.
  • ~$21,000 project (e.g., a solid privacy fence with a gate): $80 + $67.50 + $1,007 for valuation up to $20,000 + $32 for the last $1,000 → $1,186.50 permit fee + $95 issuance = about $1,282.

The main cost drivers beyond valuation: structural engineering requirements, electrical work tied to gate automation, and the number of plan-check review cycles your submittal needs.

What a Code-Compliant Project Actually Costs

Permit fees are only part of the budget. These are real outputs from the LA Electric Gate Service cost estimator, run September 17, 2026 for Beverly Hills code-compliant designs (manual swing gates; the $250 FIRSTGATE new-project promo applied; permit fees excluded):

  • Open-picket front yard: 40 linear feet of 6-foot wrought-iron picket fence (black steel pickets, 4-inch spacing — open to public view above 3 feet, per code) plus a 3×6 manual swing pedestrian gate: $11,947.95.
  • Solid side/rear yard: 60 linear feet of 6-foot solid steel privacy fence plus a 3×6 manual swing gate: $20,995.82.

A note on stucco: the popular low-stucco-base-plus-open-pickets design is not something the online estimator prices directly (it has no masonry-base option), so that configuration needs a site-visit quote — the estimator will get you the picket and gate portion. Every estimate notes that a site visit is required to confirm final scope and price.

Run your own Beverly Hills fence or gate estimate before you spend money on drawings — locking in your material and gate choices early means your permit elevations show reviewers a finished, code-compliant design instead of a placeholder.

An Editorial Perspective: The Mistakes That Cost Homeowners Time

Most delays are not code violations. They are paperwork gaps. Confirm your zone — Central, Hillside, or Trousdale — and how your front yard’s 20% line is measured before you design anything. Respect the 18-inch / 3-foot setback from the front lot line. Get HOA signatures early, not after plan check flags them. And call city plan review staff before filing if your lot has any quirks. A five-minute question up front beats a month-long resubmittal cycle.

Where to Verify These Rules Yourself

  • Beverly Hills Municipal Code §§ 10-3-2420 (Central), 10-3-2516 (Hillside), 10-3-2616 (Trousdale) — walls, fences, and hedges
  • City of Beverly Hills OPA Guide — the official Online Plan Review & Permit Application instructions (includes the Fence/Wall permit type and reviewer contact emails)
  • City of Beverly Hills Development Fee Schedule (effective July 15, 2023) — valuation-based permit fee tables (verify the current schedule before filing)
  • Planning Commission study session reports (January 12, 2023 and June 9, 2022) — the full zone-by-zone height tables and the October 2022 rear-yard height increases

Building in the City of Los Angeles rather than Beverly Hills? The rules are completely different — see our guide to the 42-inch front-yard fence rule for LA City, or our Santa Monica fence permit guide for the coastal zone. And if your project includes automation, our gate automation and custom fencing pages cover the options that pair with permit-ready designs.

Frequently Asked Questions

Do I need a permit to build a fence in Beverly Hills?

Yes, if the fence sits in a front yard (any height) or exceeds 6 feet anywhere on the property. Side and rear fences at 6 feet or under generally do not require one — unless they are tied to other permitted work like a retaining wall or grading.

How is the “first 20%” of the front yard measured?

It is 20% of the front yard’s depth, measured from the front lot line — not 20% of the whole lot. A deep Trousdale lot and a shallow Central-area lot hit the 3-foot height line at very different distances from the sidewalk, so pull your lot dimensions before designing.

What does “open to public view” mean exactly?

Over any 10-foot length, opaque materials may cover no more than 30% of the fence area, and no single opaque element may block more than 50% of the view. Wrought-iron pickets and spaced slats qualify; mostly-solid designs with small cutouts do not.

How much does a Beverly Hills fence permit cost?

Fees scale with project valuation. As an illustration from the city’s published fee schedule (effective July 2023; verify current rates before filing): a ~$12,000 fence project works out to roughly $826 in permit plus issuance fees, and a ~$21,000 project to roughly $1,282. Plan-check fees can add to that. Verify the current schedule before filing.

What is the maximum hedge height in Beverly Hills?

It depends on location and zone. In the Central area, hedges in rear yards and alley-adjacent side yards can reach 16 feet under the October 2022 update; front-yard and street-facing hedges follow stricter limits. Trousdale rear yards are capped at 8 feet.

Where do I file a Beverly Hills fence permit application?

Through the city’s Online Plan Review & Permit Application (OPA) portal. Select the Fence/Wall permit type and submit one application per structure — a front fence and a detached rear wall are filed separately.

Frequently asked questions

How much does a Beverly Hills fence permit cost?

Fees scale with project valuation. As an illustration from the city’s FY 2026–27 fee schedule: a ~$12,000 fence project works out to roughly $826 in permit plus issuance fees, and a ~$21,000 project to roughly $1,282. Plan-check fees can add to that. Verify the current schedule before filing.